Wednesday, 6 April 2011

Circuit 2

For my second circuit, I was making a voltage regulator to turn a 12v input into a 5v output.
To achieve this, i used a LM317T, among other components. 
In this circuit, other than the voltage regulator itself, i used: 
2 x Capacitors
1 x 5mm LED
2 x 1n4007 Diodes
1 x Zener Diode
1 x 150ohm Resistor
1 x 220ohm resistor
1 x 680ohm resistor

After completing this circuit and testing, i found that it was working correctly without modification.
My readings across the circuit were as follows:

Vs=12v
Vs@LM317=5.17v
Vd@R1=1.24v
Vd@R2=1.25v
Vd@R3=3.92v
Vd@LED=3.94v

From this circuit, i now have a stable 5v supply output, plus another 12v RAW output.


No comments:

Post a Comment